windowrules

update
changed autotab to 4 spaces in neovim
2025-08-05 15:19:06 +03:00 · 2025-08-04 20:24:49 +03:00 · 2025-07-29 11:07:11 +03:00 · 2025-07-23 12:11:26 +03:00 · 2025-07-19 11:10:42 +03:00 · 2025-07-17 10:23:29 +03:00
36 changed files with 2907 additions and 393 deletions
--- a/.config/hypr/animations.conf
+++ b/.config/hypr/animations.conf
@@ -1,11 +1,16 @@
-# ▄▀█ █▄░█ █ █▀▄▀█ ▄▀█ ▀█▀ █ █▀█ █▄░█
-# █▀█ █░▀█ █ █░▀░█ █▀█ ░█░ █ █▄█ █░▀█
-#
-# See https://wiki.hyprland.org/Configuring/Animations/
-# this file can be edited manually or use animation selector to select animations

-# disable animations while in hyprpicker and selection screenshot
-layerrule = noanim, hyprpicker
-layerrule = noanim, selection
+#! ▄▀█ █▄░█ █ █▀▄▀█ ▄▀█ ▀█▀ █ █▀█ █▄░█
+#! █▀█ █░▀█ █ █░▀░█ █▀█ ░█░ █ █▄█ █░▀█

-source = $HOME/.config/hypr/animations/end4.conf
+
+#*┌────────────────────────────────────────────────────────────────────────────┐
+#*│ # See https://wiki.hyprland.org/Configuring/Animations/                    │
+#*│ # HyDE Controlled content // DO NOT EDIT                                   │
+#*│ # Edit or add animations in the ./hypr/animations/ directory               │
+#*│ # and run the 'animations.sh --select' command to update this file         │
+#*│                                                                            │
+#*└────────────────────────────────────────────────────────────────────────────┘
+
+$ANIMATION=animations-vertical
+$ANIMATION_PATH=./animations/animations-vertical.conf
+source = $ANIMATION_PATH
--- a/.config/hypr/hyprland.conf
+++ b/.config/hypr/hyprland.conf
@@ -22,5 +22,3 @@ source = ./workflows.conf # workflows configuration overrides everything
 # // ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
 # // ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░

-source = ~/.config/hypr/nvidia.conf # auto sourced vars for nvidia
-    
--- a/.config/hypr/hyprlock.conf
+++ b/.config/hypr/hyprlock.conf
@@ -1,84 +1,119 @@
-#! █░█ █▄█ █▀█ █▀█ █░░ █▀█ █▀▀ █▄▀
-#! █▀█ ░█░ █▀▀ █▀▄ █▄▄ █▄█ █▄▄ █░█
+source = $HOME/.config/hypr/macchiato.conf

-#*  Hyprlock Configuration File 
-# Please do not edit this file manually.
-# Follow the instructions below on how to make changes.
+$accent = $mauve
+$accentAlpha = $mauveAlpha
+$font = JetBrainsMono Nerd Font

+# GENERAL
+general {
+  hide_cursor = true
+}

-#* Hyprlock active layout path:
-# Set the layout path to be used by Hyprlock.
-# Check the available layouts in the './hyprlock/' directory.
-# Example: /=/path/to/anurati
-$LAYOUT_PATH=~/.config/hypr/hyprlock/theme.conf
+# BACKGROUND
+background {
+  monitor =
+  path = screenshot # $HOME/.config/background
+  blur_passes = 2
+  color = $base
+}

-#*  Persistent layout declaration 
-# If a persistent layout path is declared in $XDG_CONFIG_HOME/hypr/hyde.conf,
-# the above layout setting will be ignored.
-# this should be the full path to the layout file.
+# LAYOUT
+label {
+  monitor =
+  text = Layout: $LAYOUT
+  color = $text
+  font_size = 25
+  font_family = $font
+  position = 30, -30
+  halign = left
+  valign = top
+}

-#*  All boilerplate configurations are handled by HyDE 
-source = ~/.local/share/hyde/hyprlock.conf
+# TIME
+label {
+  monitor =
+  text = $TIME
+  color = $text
+  font_size = 90
+  font_family = $font
+  position = -30, 0
+  halign = right
+  valign = top
+}

-#*  Making a custom layout 
-# To create a custom layout, make a file in the './hyprlock/' directory.
-# Example: './hyprlock/your_custom.conf'
-# To use the custom layout, set the following variable:
-# $LAYOUT_PATH=your_custom
-# The custom layout will be sourced automatically.
-# Alternatively, you can statically source the layout in '~/.config/hypr/hyde.conf'.
-# This will take precedence over the variable in '~/.config/hypr/hyprlock.conf'.
+# DATE
+label {
+  monitor =
+  text = cmd[update:43200000] date +"%A, %d %B %Y"
+  color = $text
+  font_size = 25
+  font_family = $font
+  position = -30, -150
+  halign = right
+  valign = top
+}

+# FINGERPRINT
+{
+  monitor = "";
+  text = "$FPRINTPROMPT";
+  color = "$text";
+  font_size = 14;
+  font_family = $font;
+  position = "0, -107";
+  halign = "center";
+  valign = "center";
+}

-#*  Command Variables 
-# Hyprlock ships with there default variables that can be used to customize the lock screen.
-# - https://wiki.hyprland.org/Hypr-Ecosystem/hyprlock/#label
-# HyDE also provides custom variables that extend the functionality of Hyprlock.
+# USER AVATAR
+image {
+  monitor =
+  path = $HOME/shit/hyprland-confs/catpuccin/hyprlock/catppuccin-circle.png
+  size = 130
+  border_color = $accent
+  shadow_passes = 2
+  shadow_color = $crust
+  position = 0, 100
+  halign = center
+  valign = center
+}

-# $BACKGROUND_PATH
-# - The path to the wallpaper image.
-
-# $HYPRLOCK_BACKGROUND
-# - The path to the static hyprlock wallpaper image.
-# - Can be set to set a static wallpaper for Hyprlock.
-
-# $MPRIS_IMAGE
-# - The path to the MPRIS image.
-# - If MPRIS is not available, it will show the ~/.face.icon image
-# - if available, otherwise, it will show the HyDE logo.
-
-# $PROFILE_IMAGE
-# - The path to the profile image.
-# - If the image is not available, it will show the ~/.face.icon image
-# - if available, otherwise, it will show the HyDE logo.
-
-# $GREET_TEXT
-# - A greeting text to be displayed on the lock screen.
-# - The text will be updated every hour.
-
-# $resolve.font
-# - Resolves the font name and download link.
-# - HyDE will run 'font.sh resolve' to install the font for you.
-# - Note that you needed to have a network connection to download the font.
-# - You also need to restart Hyprlock to apply the font.
-
-# cmd [update:1000] $MPRIS_TEXT
-# - Text from media players in "Title  Author" format.
-
-
-# cmd [update:1000] $SPLASH_CMD
-# - Outputs the song title when MPRIS is available,
-# - otherwise, it will output the splash command.
-
-# cmd [update:1] $CAVA_CMD
-# - The command to be executed to get the CAVA output.
-# - ⚠️ (Use with caution as it eats up the CPU.)
-
-# cmd [update:5000] $BATTERY_ICON
-# - The battery icon to be displayed on the lock screen.
-# - Only works if the battery is available.
-
-# cmd [update:1000] $KEYBOARD_LAYOUT
-# - The current keyboard layout
-# - SUPER + K to change the keyboard layout (or any binding you set)
+# Catppuccin cat on line
+image {
+  monitor = 
+  path = $HOME/shit/hyprland-confs/catpuccin/hyprlock/output.png
+  size = 200
+  border_color = rgba(0, 0, 0, 0.0)
+  position = 50, 0
+  shadow_passes = 4
+  shadow_size = 2
+  shadow_color = $peach
+  shadow_boost = 1.1
+  halign = center
+  valign = center
+}

+# INPUT FIELD
+input-field {
+  monitor =
+  size = 300, 60
+  outline_thickness = 4
+  dots_size = 0.2
+  dots_spacing = 0.2
+  dots_center = true
+  outer_color = $accent
+  inner_color = $surface0
+  font_color = $text
+  fade_on_empty = false
+  placeholder_text = <span foreground="##$textAlpha"><i>󰌾 Logged in as </i><span foreground="##$accentAlpha">$USER</span></span>
+  hide_input = false
+  check_color = $accent
+  fail_color = $red
+  fail_text = <i>$FAIL <b>($ATTEMPTS)</b></i>
+  capslock_color = $yellow
+  position = 0, -50
+  shadow_passes = 2
+  shadow_color = rgb(20, 20, 20)
+  halign = center
+  valign = center
+}
--- a/.config/hypr/keybindings.conf
+++ b/.config/hypr/keybindings.conf
@@ -10,9 +10,9 @@ $mainMod = Super # super / meta / windows key

 # Assign apps
 $term = kitty
-$editor = code
-$file = thunar
-$browser = librewolf
+$editor = nvim
+$file = dolphin
+$browser = zen-browser
 $viewer = zathura

 # Window/Session actions
@@ -30,7 +30,7 @@ bind = Ctrl+Alt, W, exec, killall waybar || waybar # toggle waybar
 # Application shortcuts
 bind = $mainMod, T, exec, $term # launch terminal emulator
 bind = $mainMod+Alt, T, exec, [float]  $term
-bind = $mainMod, E, exec, $file # launch file manager
+bind = $mainMod, E, exec, [float] $file # launch file manager
 bind = $mainMod, C, exec, $editor # launch text editor
 bind = $mainMod, F, exec, $browser # launch web browser
 bind = Ctrl+Shift, Escape, exec, $scrPath/sysmonlaunch.sh # launch system monitor (htop/btop or fallback to top)
--- a/.config/hypr/themes/colors.conf
+++ b/.config/hypr/themes/colors.conf
@@ -3,109 +3,109 @@

 # Color group 1

-$wallbash_pry1 = 98B4C2    # primary color 1
-$wallbash_txt1 = 0D0D0D    # text color 1
-$wallbash_1xa1 = 294452    # accent color 1 for primary color 1
-$wallbash_1xa2 = 3A5B6B    # accent color 2 for primary color 1
-$wallbash_1xa3 = 4B6C7D    # accent color 3 for primary color 1
-$wallbash_1xa4 = 577C8F    # accent color 4 for primary color 1
-$wallbash_1xa5 = 658FA3    # accent color 5 for primary color 1
-$wallbash_1xa6 = 7AAAC2    # accent color 6 for primary color 1
-$wallbash_1xa7 = 9ACCE6    # accent color 7 for primary color 1
-$wallbash_1xa8 = AAD9F0    # accent color 8 for primary color 1
-$wallbash_1xa9 = CCEEFF    # accent color 9 for primary color 1
+$wallbash_pry1 = 091627    # primary color 1
+$wallbash_txt1 = FFFFFF    # text color 1
+$wallbash_1xa1 = 293A52    # accent color 1 for primary color 1
+$wallbash_1xa2 = 3A4F6B    # accent color 2 for primary color 1
+$wallbash_1xa3 = 4B617D    # accent color 3 for primary color 1
+$wallbash_1xa4 = 576F8F    # accent color 4 for primary color 1
+$wallbash_1xa5 = 6580A3    # accent color 5 for primary color 1
+$wallbash_1xa6 = 7A99C2    # accent color 6 for primary color 1
+$wallbash_1xa7 = 9ABBE6    # accent color 7 for primary color 1
+$wallbash_1xa8 = AAC8F0    # accent color 8 for primary color 1
+$wallbash_1xa9 = CCE2FF    # accent color 9 for primary color 1

 # in rgba format
-$wallbash_pry1_rgba = rgba(152,180,194,0.95)    # primary color 1
-$wallbash_txt1_rgba = rgba(13,13,13,0.95)    # text color 1
-$wallbash_1xa1_rgba = rgba(41,68,82,0.95)    # accent color 1 for primary color 1
-$wallbash_1xa2_rgba = rgba(58,91,107,0.95)    # accent color 2 for primary color 1
-$wallbash_1xa3_rgba = rgba(75,108,125,0.95)    # accent color 3 for primary color 1
-$wallbash_1xa4_rgba = rgba(87,124,143,0.95)    # accent color 4 for primary color 1
-$wallbash_1xa5_rgba = rgba(101,143,163,0.95)    # accent color 5 for primary color 1
-$wallbash_1xa6_rgba = rgba(122,170,194,0.95)    # accent color 6 for primary color 1
-$wallbash_1xa7_rgba = rgba(154,204,230,0.95)    # accent color 7 for primary color 1
-$wallbash_1xa8_rgba = rgba(170,217,240,0.95)    # accent color 8 for primary color 1
-$wallbash_1xa9_rgba = rgba(204,238,255,0.95)    # accent color 9 for primary color 1
+$wallbash_pry1_rgba = rgba(9,22,39,0.95)    # primary color 1
+$wallbash_txt1_rgba = rgba(255,255,255,0.95)    # text color 1
+$wallbash_1xa1_rgba = rgba(41,58,82,0.95)    # accent color 1 for primary color 1
+$wallbash_1xa2_rgba = rgba(58,79,107,0.95)    # accent color 2 for primary color 1
+$wallbash_1xa3_rgba = rgba(75,97,125,0.95)    # accent color 3 for primary color 1
+$wallbash_1xa4_rgba = rgba(87,111,143,0.95)    # accent color 4 for primary color 1
+$wallbash_1xa5_rgba = rgba(101,128,163,0.95)    # accent color 5 for primary color 1
+$wallbash_1xa6_rgba = rgba(122,153,194,0.95)    # accent color 6 for primary color 1
+$wallbash_1xa7_rgba = rgba(154,187,230,0.95)    # accent color 7 for primary color 1
+$wallbash_1xa8_rgba = rgba(170,200,240,0.95)    # accent color 8 for primary color 1
+$wallbash_1xa9_rgba = rgba(204,226,255,0.95)    # accent color 9 for primary color 1


 # Color group 2

-$wallbash_pry2 = 547A97    # primary color 2
+$wallbash_pry2 = 521626    # primary color 2
 $wallbash_txt2 = FFFFFF    # text color 2
-$wallbash_2xa1 = 294052    # accent color 1 for primary color 2
-$wallbash_2xa2 = 3A566B    # accent color 2 for primary color 2
-$wallbash_2xa3 = 4B677D    # accent color 3 for primary color 2
-$wallbash_2xa4 = 57778F    # accent color 4 for primary color 2
-$wallbash_2xa5 = 6588A3    # accent color 5 for primary color 2
-$wallbash_2xa6 = 7AA3C2    # accent color 6 for primary color 2
-$wallbash_2xa7 = 9AC5E6    # accent color 7 for primary color 2
-$wallbash_2xa8 = AAD2F0    # accent color 8 for primary color 2
-$wallbash_2xa9 = CCE9FF    # accent color 9 for primary color 2
+$wallbash_2xa1 = 522934    # accent color 1 for primary color 2
+$wallbash_2xa2 = 6B3A47    # accent color 2 for primary color 2
+$wallbash_2xa3 = 7D4B58    # accent color 3 for primary color 2
+$wallbash_2xa4 = 8F5766    # accent color 4 for primary color 2
+$wallbash_2xa5 = A36576    # accent color 5 for primary color 2
+$wallbash_2xa6 = C27A8D    # accent color 6 for primary color 2
+$wallbash_2xa7 = E69AAE    # accent color 7 for primary color 2
+$wallbash_2xa8 = F0AABD    # accent color 8 for primary color 2
+$wallbash_2xa9 = FFCCDA    # accent color 9 for primary color 2

 # in rgba format
-$wallbash_pry2_rgba = rgba(84,122,151,0.95)    # primary color 2
+$wallbash_pry2_rgba = rgba(82,22,38,0.95)    # primary color 2
 $wallbash_txt2_rgba = rgba(255,255,255,0.95)    # text color 2
-$wallbash_2xa1_rgba = rgba(41,64,82,0.95)    # accent color 1 for primary color 2
-$wallbash_2xa2_rgba = rgba(58,86,107,0.95)    # accent color 2 for primary color 2
-$wallbash_2xa3_rgba = rgba(75,103,125,0.95)    # accent color 3 for primary color 2
-$wallbash_2xa4_rgba = rgba(87,119,143,0.95)    # accent color 4 for primary color 2
-$wallbash_2xa5_rgba = rgba(101,136,163,0.95)    # accent color 5 for primary color 2
-$wallbash_2xa6_rgba = rgba(122,163,194,0.95)    # accent color 6 for primary color 2
-$wallbash_2xa7_rgba = rgba(154,197,230,0.95)    # accent color 7 for primary color 2
-$wallbash_2xa8_rgba = rgba(170,210,240,0.95)    # accent color 8 for primary color 2
-$wallbash_2xa9_rgba = rgba(204,233,255,0.95)    # accent color 9 for primary color 2
+$wallbash_2xa1_rgba = rgba(82,41,52,0.95)    # accent color 1 for primary color 2
+$wallbash_2xa2_rgba = rgba(107,58,71,0.95)    # accent color 2 for primary color 2
+$wallbash_2xa3_rgba = rgba(125,75,88,0.95)    # accent color 3 for primary color 2
+$wallbash_2xa4_rgba = rgba(143,87,102,0.95)    # accent color 4 for primary color 2
+$wallbash_2xa5_rgba = rgba(163,101,118,0.95)    # accent color 5 for primary color 2
+$wallbash_2xa6_rgba = rgba(194,122,141,0.95)    # accent color 6 for primary color 2
+$wallbash_2xa7_rgba = rgba(230,154,174,0.95)    # accent color 7 for primary color 2
+$wallbash_2xa8_rgba = rgba(240,170,189,0.95)    # accent color 8 for primary color 2
+$wallbash_2xa9_rgba = rgba(255,204,218,0.95)    # accent color 9 for primary color 2

 # Color group 3

-$wallbash_pry3 = 38526C    # primary color 3
+$wallbash_pry3 = AF3D25    # primary color 3
 $wallbash_txt3 = FFFFFF    # text color 3
-$wallbash_3xa1 = 293D52    # accent color 1 for primary color 3
-$wallbash_3xa2 = 3A526B    # accent color 2 for primary color 3
-$wallbash_3xa3 = 4B647D    # accent color 3 for primary color 3
-$wallbash_3xa4 = 57738F    # accent color 4 for primary color 3
-$wallbash_3xa5 = 6584A3    # accent color 5 for primary color 3
-$wallbash_3xa6 = 7A9EC2    # accent color 6 for primary color 3
-$wallbash_3xa7 = 9AC0E6    # accent color 7 for primary color 3
-$wallbash_3xa8 = AACDF0    # accent color 8 for primary color 3
-$wallbash_3xa9 = CCE6FF    # accent color 9 for primary color 3
+$wallbash_3xa1 = 523029    # accent color 1 for primary color 3
+$wallbash_3xa2 = 6B423A    # accent color 2 for primary color 3
+$wallbash_3xa3 = 7D544B    # accent color 3 for primary color 3
+$wallbash_3xa4 = 8F6157    # accent color 4 for primary color 3
+$wallbash_3xa5 = A37065    # accent color 5 for primary color 3
+$wallbash_3xa6 = C2877A    # accent color 6 for primary color 3
+$wallbash_3xa7 = E6A79A    # accent color 7 for primary color 3
+$wallbash_3xa8 = F0B6AA    # accent color 8 for primary color 3
+$wallbash_3xa9 = FFD5CC    # accent color 9 for primary color 3

 # in rgba format
-$wallbash_pry3_rgba = rgba(56,82,108,0.95)    # primary color 3
+$wallbash_pry3_rgba = rgba(175,61,37,0.95)    # primary color 3
 $wallbash_txt3_rgba = rgba(255,255,255,0.95)    # text color 3
-$wallbash_3xa1_rgba = rgba(41,61,82,0.95)    # accent color 1 for primary color 3
-$wallbash_3xa2_rgba = rgba(58,82,107,0.95)    # accent color 2 for primary color 3
-$wallbash_3xa3_rgba = rgba(75,100,125,0.95)    # accent color 3 for primary color 3
-$wallbash_3xa4_rgba = rgba(87,115,143,0.95)    # accent color 4 for primary color 3
-$wallbash_3xa5_rgba = rgba(101,132,163,0.95)    # accent color 5 for primary color 3
-$wallbash_3xa6_rgba = rgba(122,158,194,0.95)    # accent color 6 for primary color 3
-$wallbash_3xa7_rgba = rgba(154,192,230,0.95)    # accent color 7 for primary color 3
-$wallbash_3xa8_rgba = rgba(170,205,240,0.95)    # accent color 8 for primary color 3
-$wallbash_3xa9_rgba = rgba(204,230,255,0.95)    # accent color 9 for primary color 3
+$wallbash_3xa1_rgba = rgba(82,48,41,0.95)    # accent color 1 for primary color 3
+$wallbash_3xa2_rgba = rgba(107,66,58,0.95)    # accent color 2 for primary color 3
+$wallbash_3xa3_rgba = rgba(125,84,75,0.95)    # accent color 3 for primary color 3
+$wallbash_3xa4_rgba = rgba(143,97,87,0.95)    # accent color 4 for primary color 3
+$wallbash_3xa5_rgba = rgba(163,112,101,0.95)    # accent color 5 for primary color 3
+$wallbash_3xa6_rgba = rgba(194,135,122,0.95)    # accent color 6 for primary color 3
+$wallbash_3xa7_rgba = rgba(230,167,154,0.95)    # accent color 7 for primary color 3
+$wallbash_3xa8_rgba = rgba(240,182,170,0.95)    # accent color 8 for primary color 3
+$wallbash_3xa9_rgba = rgba(255,213,204,0.95)    # accent color 9 for primary color 3

 # Color group 4

-$wallbash_pry4 = 21252B    # primary color 4
-$wallbash_txt4 = FFFFFF    # text color 4
-$wallbash_4xa1 = 293952    # accent color 1 for primary color 4
-$wallbash_4xa2 = 3A4E6B    # accent color 2 for primary color 4
-$wallbash_4xa3 = 4B5F7D    # accent color 3 for primary color 4
-$wallbash_4xa4 = 576D8F    # accent color 4 for primary color 4
-$wallbash_4xa5 = 657EA3    # accent color 5 for primary color 4
-$wallbash_4xa6 = 7A97C2    # accent color 6 for primary color 4
-$wallbash_4xa7 = 9AB8E6    # accent color 7 for primary color 4
-$wallbash_4xa8 = AAC6F0    # accent color 8 for primary color 4
-$wallbash_4xa9 = CCE0FF    # accent color 9 for primary color 4
+$wallbash_pry4 = E47D32    # primary color 4
+$wallbash_txt4 = 111314    # text color 4
+$wallbash_4xa1 = 523A29    # accent color 1 for primary color 4
+$wallbash_4xa2 = 6B4F3A    # accent color 2 for primary color 4
+$wallbash_4xa3 = 7D604B    # accent color 3 for primary color 4
+$wallbash_4xa4 = 8F6F57    # accent color 4 for primary color 4
+$wallbash_4xa5 = A37F65    # accent color 5 for primary color 4
+$wallbash_4xa6 = C2987A    # accent color 6 for primary color 4
+$wallbash_4xa7 = E6BA9A    # accent color 7 for primary color 4
+$wallbash_4xa8 = F0C7AA    # accent color 8 for primary color 4
+$wallbash_4xa9 = FFE1CC    # accent color 9 for primary color 4

 # in rgba format
-$wallbash_pry4_rgba = rgba(33,37,43,0.95)    # primary color 4
-$wallbash_txt4_rgba = rgba(255,255,255,0.95)    # text color 4
-$wallbash_4xa1_rgba = rgba(41,57,82,0.95)    # accent color 1 for primary color 4
-$wallbash_4xa2_rgba = rgba(58,78,107,0.95)    # accent color 2 for primary color 4
-$wallbash_4xa3_rgba = rgba(75,95,125,0.95)    # accent color 3 for primary color 4
-$wallbash_4xa4_rgba = rgba(87,109,143,0.95)    # accent color 4 for primary color 4
-$wallbash_4xa5_rgba = rgba(101,126,163,0.95)    # accent color 5 for primary color 4
-$wallbash_4xa6_rgba = rgba(122,151,194,0.95)    # accent color 6 for primary color 4
-$wallbash_4xa7_rgba = rgba(154,184,230,0.95)    # accent color 7 for primary color 4
-$wallbash_4xa8_rgba = rgba(170,198,240,0.95)    # accent color 8 for primary color 4
-$wallbash_4xa9_rgba = rgba(204,224,255,0.95)    # accent color 9 for primary color 4
+$wallbash_pry4_rgba = rgba(228,125,50,0.95)    # primary color 4
+$wallbash_txt4_rgba = rgba(17,19,20,0.95)    # text color 4
+$wallbash_4xa1_rgba = rgba(82,58,41,0.95)    # accent color 1 for primary color 4
+$wallbash_4xa2_rgba = rgba(107,79,58,0.95)    # accent color 2 for primary color 4
+$wallbash_4xa3_rgba = rgba(125,96,75,0.95)    # accent color 3 for primary color 4
+$wallbash_4xa4_rgba = rgba(143,111,87,0.95)    # accent color 4 for primary color 4
+$wallbash_4xa5_rgba = rgba(163,127,101,0.95)    # accent color 5 for primary color 4
+$wallbash_4xa6_rgba = rgba(194,152,122,0.95)    # accent color 6 for primary color 4
+$wallbash_4xa7_rgba = rgba(230,186,154,0.95)    # accent color 7 for primary color 4
+$wallbash_4xa8_rgba = rgba(240,199,170,0.95)    # accent color 8 for primary color 4
+$wallbash_4xa9_rgba = rgba(255,225,204,0.95)    # accent color 9 for primary color 4
--- a/.config/hypr/themes/theme.conf
+++ b/.config/hypr/themes/theme.conf
@@ -1,42 +1,54 @@
-# // P̳r̳a̳s̳a̳n̳t̳h̳ R̳a̳n̳g̳a̳n̳

-$GTK_THEME = Catppuccin-Latte
-$ICON_THEME = Tela-circle-grey
-$COLOR_SCHEME = prefer-light
-
-# Optional: The varibles above will be set automatically when the theme is loaded
-# This exec commands will soon be deprecated
+$GTK_THEME=WhiteSur-Dark
+$ICON_THEME=WhiteSur
+$COLOR_SCHEME=prefer-dark
+$CURSOR_THEME=macOS-Black
+$CURSOR_SIZE=26                                
+$FONT=SF Pro Rounded Regular 10.5
+$CODE_THEME=MacOS Modern Dark - Xcode Modern


 general {
-    gaps_in = 3
-    gaps_out = 8
+    gaps_in = 4
+    gaps_out = 10
    border_size = 2
-    col.active_border = rgba(dc8a78ff) rgba(8839efff) 45deg
-    col.inactive_border = rgba(7287fdcc) rgba(179299cc) 45deg
+    col.active_border = rgba(0D9AC1FF) rgba(0B4C5DFF) 45deg
+    col.inactive_border = rgba(4A3B4ACC) rgba(1A2B3DCC) 45deg
    layout = dwindle
    resize_on_border = true
 }

 group {
-    col.border_active = rgba(dc8a78ff) rgba(8839efff) 45deg
-    col.border_inactive = rgba(7287fdcc) rgba(179299cc) 45deg
-    col.border_locked_active = rgba(dc8a78ff) rgba(8839efff) 45deg
-    col.border_locked_inactive = rgba(7287fdcc) rgba(179299cc) 45deg
+    col.border_active = rgba(0D9AC1FF) rgba(0B4C5DFF) 45deg
+    col.border_inactive = rgba(4A3B4ACC) rgba(1A2B3DCC) 45deg
+    col.border_locked_active = rgba(0D9AC1FF) rgba(0B4C5DFF) 45deg
+    col.border_locked_inactive = rgba(4A3B4ACC) rgba(1A2B3DCC) 45deg
 }

 decoration {
    rounding = 10
-    shadow:enabled = false
+    active_opacity = 0.9
+    inactive_opacity = 0.9

    blur {
        enabled = yes
-        size = 6
-        passes = 3
+        size = 4
+        passes = 4
+        noise = 0.02
        new_optimizations = on
        ignore_opacity = on
        xray = false
    }
+
+    shadow {
+        enabled = false
+        ignore_window = true
+        offset = 0 0
+        range = 15
+        render_power = 1
+        color = 0x80ffffff
+    }
 }

-layerrule = blur,waybar
+
+blurls = waybar
--- a/.config/hypr/themes/wallbash.conf
+++ b/.config/hypr/themes/wallbash.conf
@@ -1,19 +1,19 @@
 # Auto-generated by HyDE // Read-only
 # // ----------------------------
-# HyDE Theme: Catppuccin Latte
-# Configuration File: "/home/elleoma/.config/hyde/themes/Catppuccin Latte/hypr.theme"
+# HyDE Theme: Monterey Frost
+# Configuration File: "/home/elleoma/.config/hyde/themes/Monterey Frost/hypr.theme"
 # Wallbash Mode : theme
 # // ----------------------------

-$HYDE_THEME=Catppuccin Latte
-$GTK_THEME=Catppuccin-Latte
-$COLOR-SCHEME=prefer-light
-$ICON_THEME=Tela-circle-grey
+$HYDE_THEME=Monterey Frost
+$GTK_THEME=WhiteSur-Dark
+$COLOR-SCHEME=prefer-dark
+$ICON_THEME=WhiteSur

-$CURSOR_THEME=Bibata-Modern-Ice
-$CURSOR_SIZE=24
+$CURSOR_THEME=macOS-Black
+$CURSOR_SIZE=26

-$FONT=Cantarell
+$FONT=SF Pro Rounded Regular 10.5
 $FONT_SIZE=10
 $DOCUMENT_FONT=Cantarell
 $DOCUMENT_FONT_SIZE=10
@@ -21,7 +21,7 @@ $MONOSPACE_FONT=CaskaydiaCove Nerd Font Mono
 $MONOSPACE_FONT_SIZE=9


-$CODE_THEME=Wallbash
+$CODE_THEME=MacOS Modern Dark - Xcode Modern
 $SDDM_THEME=

 # // ----------------------------
--- a/.config/hypr/windowrules.conf
+++ b/.config/hypr/windowrules.conf
@@ -62,6 +62,7 @@ windowrulev2 = float,class:^(kitty)$,title:^(htop)$
 windowrulev2 = size 800 600,center,class:^(kitty)$
 windowrulev2 = float,class:^(vlc)$
 windowrulev2 = float,class:^(thunar)$
+windowrulev2 = size 1200 800,float,class:^(org.kde.dolphin)$
 windowrulev2 = float,class:^(mpv)$
 windowrulev2 = float,class:^(kvantummanager)$
 windowrulev2 = float,class:^(qt5ct)$
--- a/.config/hypr/workflows.conf
+++ b/.config/hypr/workflows.conf
@@ -1,19 +1,23 @@
 #! █░█░█ █▀█ █▀█ █▄▀ █▀▀ █░░ █▀█ █░█░█ █▀
 #! ▀▄▀▄▀ █▄█ █▀▄ █░█ █▀░ █▄▄ █▄█ ▀▄▀▄▀ ▄█

-# This file sets the current workflow for Hyprland
-# HyDE Controlled content // DO NOT EDIT
-# Edit or add workflows in the ./workflows/ directory
-# and run the 'workflows.sh select' command to update this file

-#  Workflows are a set of configurations that can be applied to Hyprland
-#   that suits the actual workflow you are doing. 
-# It can be gaming mode, work mode, or anything else you can think of.
-# you can also exec a command within the workflow
+#*┌────────────────────────────────────────────────────────────────────────────┐
+#*│ # HyDE Controlled content // DO NOT EDIT                                   │
+#*│ # This file sets the current workflow for Hyprland                         │
+#*│ # Edit or add workflows in the ./workflows/ directory                      │
+#*│ # and run the 'workflows.sh --select' command to update this file          │
+#*│                                                                            │
+#*│ #  Workflows are a set of configurations that can be applied to Hyprland   │
+#*│ #   that suits the actual workflow you are doing.                          │
+#*│ # It can be gaming mode, work mode, or anything else you can think of.     │
+#*│ # you can also exec a command within the workflow                          │
+#*│                                                                            │
+#*└────────────────────────────────────────────────────────────────────────────┘

 $WORKFLOW = default
 $WORKFLOW_ICON = 
-$WORKFLOW_DESCRIPTION = Default HyDE configuration // Disables workflow overrides
+$WORKFLOW_DESCRIPTION = Unset workflow configuration
 $WORKFLOWS_PATH = ./workflows/default.conf
 source = $WORKFLOWS_PATH

--- a/.config/hypr/workflows/gaming.conf
+++ b/.config/hypr/workflows/gaming.conf
@@ -10,14 +10,27 @@ decoration {
    shadow {        
        enabled = 0
    }
-    blur:enabled = 0
+    blur {
+        enabled = 0
+        xray = 1
+    }
    rounding = 0 
+    active_opacity = 1 
+    inactive_opacity = 1 
+    fullscreen_opacity = 1 
 }

 general {
-gaps_in = 0
-gaps_out = 0
-border_size = 1
+    gaps_in = 0
+    gaps_out = 0
+    border_size = 1
 }

 animations:enabled = 0
+
+layerrule = noanim,waybar 
+layerrule = noanim,swaync-notification-window 
+layerrule = noanim,swww-daemon 
+layerrule = noanim,rofi
+
+windowrule = opaque,class:(.*) # ensure all windows are opaque 
--- a/.config/hypr/workflows/powersaver.conf
+++ b/.config/hypr/workflows/powersaver.conf
@@ -9,21 +9,24 @@ decoration {
    shadow {        
        enabled = 0
    }
-    blur:enabled = 0
+    blur {
+        enabled = 0
+        xray = 1
+    }
    rounding = 0 
    active_opacity = 1 
    inactive_opacity = 1 
    fullscreen_opacity = 1 
-    fullscreen_opacity = 1 
 }

 general {
-gaps_in = 0
-gaps_out = 0
-border_size = 1
+    gaps_in = 0
+    gaps_out = 0
+    border_size = 1
 }

 animations:enabled = 0
+misc:vfr = true

 layerrule = noanim,waybar 
 layerrule = noanim,swaync-notification-window 
--- a/.config/hypr/workflows/snappy.conf
+++ b/.config/hypr/workflows/snappy.conf
@@ -9,9 +9,9 @@ rounding = 0
 }

 general {
-gaps_in = 0
-gaps_out = 0
-border_size = 1
+    gaps_in = 0
+    gaps_out = 0
+    border_size = 1
 }

 animations:enabled = 0
--- a/.config/nvim/lazy-lock.json
+++ b/.config/nvim/lazy-lock.json
@@ -1,6 +1,6 @@
 {
-  "LuaSnip": { "branch": "master", "commit": "eda5be8f0ce9816278671f0b578cdbb8b762c701" },
-  "NvChad": { "branch": "v2.5", "commit": "a792fd1d96c1511a165b18911164baa28bf1d6f4" },
+  "LuaSnip": { "branch": "master", "commit": "de10d8414235b0a8cabfeba60d07c24304e71f5c" },
+  "NvChad": { "branch": "v2.5", "commit": "29ebe31ea6a4edf351968c76a93285e6e108ea08" },
  "base46": { "branch": "v2.5", "commit": "fde7a2cd54599e148d376f82980407c2d24b0fa2" },
  "cmp-async-path": { "branch": "main", "commit": "0ed1492f59e730c366d261a5ad822fa37e44c325" },
  "cmp-buffer": { "branch": "main", "commit": "b74fab3656eea9de20a9b8116afa3cfc4ec09657" },
@@ -8,29 +8,30 @@
  "cmp-nvim-lua": { "branch": "main", "commit": "f12408bdb54c39c23e67cab726264c10db33ada8" },
  "cmp_luasnip": { "branch": "master", "commit": "98d9cb5c2c38532bd9bdb481067b20fea8f32e90" },
  "conform.nvim": { "branch": "master", "commit": "973f3cb73887d510321653044791d7937c7ec0fa" },
-  "crates.nvim": { "branch": "main", "commit": "5d8b1bef686db0fabe5f1bb593744b617e8f1405" },
+  "crates.nvim": { "branch": "main", "commit": "fe66681d97a1eefddb5d7e48bd427b2cb0271881" },
  "friendly-snippets": { "branch": "main", "commit": "572f5660cf05f8cd8834e096d7b4c921ba18e175" },
-  "gitsigns.nvim": { "branch": "main", "commit": "362fe61f9f19e9bceff178792780df5cce118a7d" },
-  "image.nvim": { "branch": "master", "commit": "4c51d6202628b3b51e368152c053c3fb5c5f76f2" },
+  "gitsigns.nvim": { "branch": "main", "commit": "8270378ab83540b03d09c0194ba3e208f9d0cb72" },
  "indent-blankline.nvim": { "branch": "master", "commit": "005b56001b2cb30bfa61b7986bc50657816ba4ba" },
  "lazy.nvim": { "branch": "main", "commit": "6c3bda4aca61a13a9c63f1c1d1b16b9d3be90d7a" },
-  "mason.nvim": { "branch": "main", "commit": "8024d64e1330b86044fed4c8494ef3dcd483a67c" },
+  "mason.nvim": { "branch": "main", "commit": "9e25c98d4826998460926f8c5c2284848d80ae89" },
  "menu": { "branch": "main", "commit": "7a0a4a2896b715c066cfbe320bdc048091874cc6" },
  "minty": { "branch": "main", "commit": "aafc9e8e0afe6bf57580858a2849578d8d8db9e0" },
  "nvim-autopairs": { "branch": "master", "commit": "23320e75953ac82e559c610bec5a90d9c6dfa743" },
  "nvim-cmp": { "branch": "main", "commit": "b5311ab3ed9c846b585c0c15b7559be131ec4be9" },
-  "nvim-dap": { "branch": "master", "commit": "1c75a797b4017fec6491f509cf196c8c8833f26f" },
-  "nvim-dap-ui": { "branch": "master", "commit": "73a26abf4941aa27da59820fd6b028ebcdbcf932" },
-  "nvim-lspconfig": { "branch": "master", "commit": "bb3fb99cf14daa33014331ac6eb4b5de9180f775" },
+  "nvim-dap": { "branch": "master", "commit": "a479e25ed5b5d331fb46ee4b9e160ff02ac64310" },
+  "nvim-dap-ui": { "branch": "master", "commit": "cf91d5e2d07c72903d052f5207511bf7ecdb7122" },
+  "nvim-lspconfig": { "branch": "master", "commit": "63a38440989c58e1f100373ab603fd24665bdc9a" },
  "nvim-nio": { "branch": "master", "commit": "21f5324bfac14e22ba26553caf69ec76ae8a7662" },
-  "nvim-tree.lua": { "branch": "master", "commit": "b0b49552c9462900a882fe772993b01d780445fe" },
+  "nvim-tree.lua": { "branch": "master", "commit": "0a7fcdf3f8ba208f4260988a198c77ec11748339" },
  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
-  "nvim-web-devicons": { "branch": "master", "commit": "19d6211c78169e78bab372b585b6fb17ad974e82" },
-  "plenary.nvim": { "branch": "master", "commit": "857c5ac632080dba10aae49dba902ce3abf91b35" },
+  "nvim-web-devicons": { "branch": "master", "commit": "3362099de3368aa620a8105b19ed04c2053e38c0" },
+  "plenary.nvim": { "branch": "master", "commit": "b9fd5226c2f76c951fc8ed5923d85e4de065e509" },
+  "riscv-asm-vim": { "branch": "master", "commit": "af37cced21452c6edbe1f42811103be34ee19de2" },
  "rust.vim": { "branch": "master", "commit": "889b9a7515db477f4cb6808bef1769e53493c578" },
-  "rustaceanvim": { "branch": "master", "commit": "322224d00a731d75eed6b700d38e460fd30f6e3c" },
+  "rustaceanvim": { "branch": "master", "commit": "7f4b28a888340c7658e3f95a965cee67f29f9a23" },
  "telescope.nvim": { "branch": "master", "commit": "b4da76be54691e854d3e0e02c36b0245f945c2c7" },
-  "ui": { "branch": "v3.0", "commit": "ec5b1f8e591b2e8f1cd3653b41bb14d9cd43dfd1" },
+  "ui": { "branch": "v3.0", "commit": "dc4950f5bd4117e2da108b681506c908b93d4a62" },
+  "vim-wakatime": { "branch": "master", "commit": "3403495670f0ee08887401a28f8430dc4ac67429" },
  "volt": { "branch": "main", "commit": "7b8c5e790120d9f08c8487dcb80692db6d2087a1" },
  "which-key.nvim": { "branch": "main", "commit": "370ec46f710e058c9c1646273e6b225acf47cbed" }
 }
--- a/.config/nvim/lua/options.lua
+++ b/.config/nvim/lua/options.lua
@@ -1,6 +1,15 @@
 require "nvchad.options"

 -- add yours here!
+local o = vim.o
+
+-- set tabsize
+o.tabstop = 4
+o.expandtab = true
+o.shiftwidth = 4

 -- local o = vim.o
-- o.cursorlineopt ='both' -- to enable cursorline!
+o.cursorlineopt ='both' -- to enable cursorline!
+
+-- risc-v highlighting
+vim.g.riscv_asm_all_enable = true
--- a/.config/nvim/lua/plugins/init.lua
+++ b/.config/nvim/lua/plugins/init.lua
@@ -85,15 +85,28 @@ return {
    end
  },

+  -- Summer time fest
  {
-    "3rd/image.nvim",
-    build = false, -- so that it doesn't build the rock https://github.com/3rd/image.nvim/issues/91#issuecomment-2453430239
-    lazy = false,
-    opts = {
-        processor = "magick_cli",
-    }
+    'wakatime/vim-wakatime',
+    lazy = false
  },

+  -- RISC-V advanced highlighting
+  {
+  "henry-hsieh/riscv-asm-vim",
+  ft = { "riscv_asm" },
+  -- riscv_asm_all_enable = true,
+  }
+
+  -- {
+  --   "3rd/image.nvim",
+  --   build = false, -- so that it doesn't build the rock https://github.com/3rd/image.nvim/issues/91#issuecomment-2453430239
+  --   lazy = false,
+  --   opts = {
+  --       processor = "magick_cli",
+  --   }
+  -- },
+
  -- {
  -- 	"nvim-treesitter/nvim-treesitter",
  -- 	opts = {
--- a/.config/zsh/.p10k.zsh
+++ b/.config/zsh/.p10k.zsh
--- a/.config/zsh/.zshenv
+++ b/.config/zsh/.zshenv
@@ -0,0 +1,16 @@
+#!/usr/bin/env zsh
+
+#! ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗
+#! ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝
+#! ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░
+#! ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░
+#! ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
+#! ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░
+
+# Load all custom module files // Directories are ignored
+# As Directories are ignored, we can store a bunch of boilerplate script in a ``./conf.d/custom-directory``
+# then we can make an entry point script: `./conf.d/custom-directory.zsh`managing all the files in that directory
+
+for file in "${ZDOTDIR:-$HOME/.config/zsh}/conf.d/"*.zsh; do
+  [ -r "$file" ] && source "$file"
+done
--- a/.config/zsh/.zshrc
+++ b/.config/zsh/.zshrc
@@ -0,0 +1,97 @@
+# Add user configurations here
+# For HyDE to not touch your beloved configurations,
+# we added a config file for you to customize HyDE before loading zshrc
+# Edit $ZDOTDIR/.user.zsh to customize HyDE before loading zshrc
+
+#  Plugins 
+# oh-my-zsh plugins are loaded  in $ZDOTDIR/.user.zsh file, see the file for more information
+
+#  Aliases 
+# Override aliases here in '$ZDOTDIR/.zshrc' (already set in .zshenv)
+
+# # Helpful aliases
+alias c='clear'                                                        # clear terminal
+alias l='eza -lh --icons=auto'                                         # long list
+alias ls='eza -1 --icons=auto'                                         # short list
+alias ll='eza -lha --icons=auto --sort=name --group-directories-first' # long list all
+alias ld='eza -lhD --icons=auto'                                       # long list dirs
+alias lt='eza --icons=auto --tree'                                     # list folder as tree
+alias un='paru -Rns'                                             # uninstall package
+alias up='paru -Syu'                                             # update system/package/aur
+alias pl='paru -Qs'                                              # list installed package
+alias pa='paru -Ss'                                              # list available package
+alias pc='paru -Sc'                                              # remove unused cache
+alias po='paru -Qtdq | paru -Rns -'                        # remove unused packages, also try > paru -Qqd | paru -Rsu --print -
+alias fastfetch='fastfetch --logo arch2'
+alias  l='eza -1h  --icons=auto --sort=name --group-directories-first' # long list
+alias ls='eza -l   --icons=auto --sort=name --group-directories-first' # short list
+alias ll='eza -lha --icons=auto --sort=name --group-directories-first' # long list all
+alias дд='eza -lha --icons=auto --sort=name --group-directories-first' # sometimes i forget to change keyboard layout
+
+
+# # Directory navigation shortcuts
+alias ..='cd ..'
+alias ...='cd ../..'
+alias .3='cd ../../..'
+alias .4='cd ../../../..'
+alias .5='cd ../../../../..'
+
+# # Always mkdir a path (this doesn't inhibit functionality to make a single dir)
+alias mkdir='mkdir -p'
+
+#  This is your file 
+# Add your configurations here
+export EDITOR=nvim
+#export EDITOR=code
+
+# unset -f command_not_found_handler # Uncomment to prevent searching for commands not found in package manager
+#
+
+# My own helpful aliases
+alias icat='kitten icat' # display images in terminal
+alias ssh='kitten ssh' # functional ssh with kitty
+alias snv='sudo -E nvim' # sudo nvim
+alias nv='nvim'
+alias pi='ssh omoelle'
+alias pi_tl='ssh omoelle-tl'
+alias pi-mount='sshfs omoelle:/home/elleoma ~/mnt && cd ~/mnt'
+alias pi_tl-mount='sshfs omoelle-tl:/home/elleoma ~/mnt && cd ~/mnt'
+alias wifi="nmcli d wifi show-password | grep 'Password' | awk -F': ' '{ print \$2 }'"
+alias pivpn="wg-quick up laptop"
+alias config='git --git-dir=/home/elleoma/.config --work-tree=/home/elleoma'
+alias wp='git --git-dir=$HOME/shit/wallpapers/.wp --work-tree=$HOME/shit/wallpapers'
+alias killwayvnc='killall wayvnc'
+
+# git aliases
+alias gs='git status '
+alias ga='git add '
+alias gb='git branch '
+alias gc='git commit'
+alias gd='git diff'
+alias gco='git checkout '
+alias gk='gitk --all&'
+alias gx='gitx --all'
+alias got='git '
+alias get='git '
+alias gut='git '
+
+# Syntax highlighting for man pages
+export MANPAGER='nvim +Man!'
+
+# Setting Ruby path
+export GEM_HOME="$(ruby -e 'puts Gem.user_dir')"
+export PATH="$PATH:$GEM_HOME/bin"
+
+# Created by `pipx` on 2025-02-01 15:08:39
+export PATH="$PATH:/home/elleoma/.local/bin"
+
+# Setting up Rust
+export PATH="$HOME/.cargo/bin:$PATH"
+
+#THIS MUST BE AT THE END OF THE FILE FOR SDKMAN TO WORK!!!
+export SDKMAN_DIR="$HOME/.sdkman"
+[[ -s "$HOME/.sdkman/bin/sdkman-init.sh" ]] && source "$HOME/.sdkman/bin/sdkman-init.sh"
+export PATH=~/.npm-global/bin:$PATH
+
+# go binaries path
+export PATH=~/go/bin:$PATH
--- a/.config/zsh/completions/fzf.zsh
+++ b/.config/zsh/completions/fzf.zsh
@@ -0,0 +1,4 @@
+    # Ctrl-R fzf completio
+    if command -v fzf &>/dev/null; then
+        eval "$(fzf --zsh)"
+    fi
--- a/.config/zsh/completions/hydectl.zsh
+++ b/.config/zsh/completions/hydectl.zsh
@@ -0,0 +1,5 @@
+    # hydectl tab completion
+    if command -v hydectl &>/dev/null; then
+        compdef _hydectl hydectl
+        eval "$(hydectl completion zsh)"
+    fi
--- a/.config/zsh/conf.d/00-hyde.zsh
+++ b/.config/zsh/conf.d/00-hyde.zsh
@@ -0,0 +1,20 @@
+#!/usr/bin/env zsh
+
+#! ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗
+#! ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝
+#! ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░
+#! ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░
+#! ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
+#! ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░
+
+
+# Sources vital global environment variables and configurations // Users are encouraged to use ./user.zsh for customization
+# shellcheck disable=SC1091
+if ! . "$ZDOTDIR/conf.d/hyde/env.zsh"; then
+    echo "Error: Could not source $ZDOTDIR/conf.d/hyde/env.zsh"
+    return 1
+fi
+
+if [[ $- == *i* ]] && [ -f "$ZDOTDIR/conf.d/hyde/terminal.zsh" ]; then
+    . "$ZDOTDIR/conf.d/hyde/terminal.zsh" || echo "Error: Could not source $ZDOTDIR/conf.d/hyde/terminal.zsh"
+fi
--- a/.config/zsh/conf.d/hyde/env.zsh
+++ b/.config/zsh/conf.d/hyde/env.zsh
@@ -0,0 +1,51 @@
+#!/usr/bin/env zsh
+
+#! ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗
+#! ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝
+#! ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░
+#! ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░
+#! ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
+#! ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░
+
+# Hyde's Shell Environment Initialization Script
+# If users used UWSM, uwsm will override any variables set anywhere in your shell configurations
+
+# Basic PATH prepending (user local bin)
+PATH="$HOME/.local/bin:$PATH"
+
+# XDG Base Directory Specification variables with defaults
+XDG_CONFIG_HOME="${XDG_CONFIG_HOME:-$HOME/.config}"
+XDG_DATA_HOME="${XDG_DATA_HOME:-$HOME/.local/share}"
+XDG_DATA_DIRS="${XDG_DATA_DIRS:-$XDG_DATA_HOME:/usr/local/share:/usr/share}"
+XDG_STATE_HOME="${XDG_STATE_HOME:-$HOME/.local/state}"
+XDG_CACHE_HOME="${XDG_CACHE_HOME:-$HOME/.cache}"
+
+# XDG User Directories (fallback to xdg-user-dir command if available)
+if command -v xdg-user-dir >/dev/null 2>&1; then
+  XDG_DESKTOP_DIR="${XDG_DESKTOP_DIR:-$(xdg-user-dir DESKTOP)}"
+  XDG_DOWNLOAD_DIR="${XDG_DOWNLOAD_DIR:-$(xdg-user-dir DOWNLOAD)}"
+  XDG_TEMPLATES_DIR="${XDG_TEMPLATES_DIR:-$(xdg-user-dir TEMPLATES)}"
+  XDG_PUBLICSHARE_DIR="${XDG_PUBLICSHARE_DIR:-$(xdg-user-dir PUBLICSHARE)}"
+  XDG_DOCUMENTS_DIR="${XDG_DOCUMENTS_DIR:-$(xdg-user-dir DOCUMENTS)}"
+  XDG_MUSIC_DIR="${XDG_MUSIC_DIR:-$(xdg-user-dir MUSIC)}"
+  XDG_PICTURES_DIR="${XDG_PICTURES_DIR:-$(xdg-user-dir PICTURES)}"
+  XDG_VIDEOS_DIR="${XDG_VIDEOS_DIR:-$(xdg-user-dir VIDEOS)}"
+fi
+
+# Less history file location
+LESSHISTFILE="${LESSHISTFILE:-/tmp/less-hist}"
+
+# Application config files
+PARALLEL_HOME="$XDG_CONFIG_HOME/parallel"
+SCREENRC="$XDG_CONFIG_HOME/screen/screenrc"
+TERMINFO="$XDG_DATA_HOME"/terminfo
+TERMINFO_DIRS="$XDG_DATA_HOME"/terminfo:/usr/share/terminfo
+WGETRC="${XDG_CONFIG_HOME}/wgetrc"
+PYTHON_HISTORY="$XDG_STATE_HOME/python_history"
+
+# Export all variables
+export PATH \
+  XDG_CONFIG_HOME XDG_DATA_HOME XDG_DATA_DIRS XDG_STATE_HOME XDG_CACHE_HOME \
+  XDG_DESKTOP_DIR XDG_DOWNLOAD_DIR XDG_TEMPLATES_DIR XDG_PUBLICSHARE_DIR \
+  XDG_DOCUMENTS_DIR XDG_MUSIC_DIR XDG_PICTURES_DIR XDG_VIDEOS_DIR \
+  LESSHISTFILE PARALLEL_HOME SCREENRC
--- a/.config/zsh/conf.d/hyde/prompt.zsh
+++ b/.config/zsh/conf.d/hyde/prompt.zsh
@@ -0,0 +1,36 @@
+#!/usr/bin/env zsh
+
+#! ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗
+#! ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝
+#! ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░
+#! ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░
+#! ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
+#! ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░
+
+# Let HyDE immediately load prompts
+# For now supported prompts are Starship and Powerlevel10k (p10k)
+
+# Exit early if HYDE_ZSH_PROMPT is not set to 1
+if [[ "${HYDE_ZSH_PROMPT}" != "1" ]]; then
+    return
+fi
+
+if command -v starship &>/dev/null; then
+    # ===== START Initialize Starship prompt =====
+    eval "$(starship init zsh)"
+    export STARSHIP_CACHE=$XDG_CACHE_HOME/starship
+    export STARSHIP_CONFIG=$XDG_CONFIG_HOME/starship/starship.toml
+# ===== END Initialize Starship prompt =====
+elif [ -r $HOME/.p10k.zsh ] || [ -r $ZDOTDIR/.p10k.zsh ]; then
+    # ===== START Initialize Powerlevel10k theme =====
+    POWERLEVEL10K_TRANSIENT_PROMPT=same-dir
+    P10k_THEME=${P10k_THEME:-/usr/share/zsh-theme-powerlevel10k/powerlevel10k.zsh-theme}
+    [[ -r $P10k_THEME ]] && source $P10k_THEME
+    # To customize prompt, run `p10k configure` or edit $HOME/.p10k.zsh
+    if [[ -f $HOME/.p10k.zsh ]]; then
+        source $HOME/.p10k.zsh
+    elif [[ -f $ZDOTDIR/.p10k.zsh ]]; then
+        source $ZDOTDIR/.p10k.zsh
+    fi
+# ===== END Initialize Powerlevel10k theme =====
+fi
--- a/.config/zsh/conf.d/hyde/terminal.zsh
+++ b/.config/zsh/conf.d/hyde/terminal.zsh
@@ -0,0 +1,248 @@
+#!/usr/bin/env zsh
+
+#! ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗
+#! ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝
+#! ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░
+#! ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░
+#! ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░
+#! ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░
+
+# HyDE's ZSH env configuration
+# This file is sourced by ZSH on startup
+# And ensures that we have an obstruction-free .zshrc file
+# This also ensures that the proper HyDE $ENVs are loaded
+
+function _load_functions() {
+    # Load all custom function files // Directories are ignored
+    for file in "${ZDOTDIR:-$HOME/.config/zsh}/functions/"*.zsh; do
+        [ -r "$file" ] && source "$file"
+    done
+}
+
+function _load_completions() {
+    for file in "${ZDOTDIR:-$HOME/.config/zsh}/completions/"*.zsh; do
+        [ -r "$file" ] && source "$file"
+    done
+}
+
+function _dedup_zsh_plugins {
+    unset -f _dedup_zsh_plugins
+    # Oh-my-zsh installation path
+    zsh_paths=(
+        "$HOME/.oh-my-zsh"
+        "/usr/local/share/oh-my-zsh"
+        "/usr/share/oh-my-zsh"
+    )
+    for zsh_path in "${zsh_paths[@]}"; do [[ -d $zsh_path ]] && export ZSH=$zsh_path && break; done
+    # Load Plugins
+    hyde_plugins=(git zsh-256color zsh-autosuggestions zsh-syntax-highlighting)
+    plugins+=("${plugins[@]}" "${hyde_plugins[@]}")
+    # Deduplicate plugins
+    plugins=("${plugins[@]}")
+    plugins=($(printf "%s\n" "${plugins[@]}" | sort -u))
+    # Defer oh-my-zsh loading until after prompt appears
+    typeset -g DEFER_OMZ_LOAD=1
+}
+
+function _defer_omz_after_prompt_before_input() {
+
+    [[ -r $ZSH/oh-my-zsh.sh ]] && source $ZSH/oh-my-zsh.sh
+    #! Never load time consuming functions here
+
+    # Add your completions directory to fpath
+    fpath=($ZDOTDIR/completions "${fpath[@]}")
+
+    _load_compinit
+    _load_functions
+    _load_completions
+
+    # zsh-autosuggestions won't work on first prompt when deferred
+    if typeset -f _zsh_autosuggest_start >/dev/null; then
+        _zsh_autosuggest_start
+    fi
+
+    chmod +r $ZDOTDIR/.zshrc # Make sure .zshrc is readable
+    [[ -r $ZDOTDIR/.zshrc ]] && source $ZDOTDIR/.zshrc
+}
+
+function _load_deferred_plugin_system_by_hyde() {
+
+    # Exit early if HYDE_ZSH_DEFER is not set to 1
+    if [[ "${HYDE_ZSH_DEFER}" != "1" ]]; then
+        unset -f _load_deferred_plugin_system_by_hyde
+        return
+    fi
+
+    # Defer oh-my-zsh loading until after prompt appears
+    # Load oh-my-zsh when line editor initializes // before user input
+    if [[ -n $DEFER_OMZ_LOAD ]]; then
+        unset DEFER_OMZ_LOAD
+        [[ ${VSCODE_INJECTION} == 1 ]] || chmod -r $ZDOTDIR/.zshrc # let vscode read .zshrc
+        zle -N zle-line-init _defer_omz_after_prompt_before_input  # Loads when the line editor initializes // The best option
+    fi
+    #  Below this line are the commands that are executed after the prompt appears
+
+    # autoload -Uz add-zsh-hook
+    # add-zsh-hook zshaddhistory load_omz_deferred # loads after the first command is added to history
+    # add-zsh-hook precmd load_omz_deferred # Loads when shell is ready to accept commands
+    # add-zsh-hook preexec load_omz_deferred # Loads before the first command executes
+
+    # TODO: add handlers in pm.sh
+    # for these aliases please manually add the following lines to your .zshrc file.(Using yay as the aur helper)
+    # pc='yay -Sc' # remove all cached packages
+    # po='yay -Qtdq | ${PM_COMMAND[@]} -Rns -' # remove orphaned packages
+
+    # zsh-autosuggestions won't work on first prompt when deferred
+    if typeset -f _zsh_autosuggest_start >/dev/null; then
+        _zsh_autosuggest_start
+    fi
+
+    # Some binds won't work on first prompt when deferred
+    bindkey '\e[H' beginning-of-line
+    bindkey '\e[F' end-of-line
+
+}
+
+function do_render {
+    # Check if the terminal supports images
+    local type="${1:-image}"
+    # TODO: update this list if needed
+    TERMINAL_IMAGE_SUPPORT=(kitty konsole ghostty WezTerm)
+    local terminal_no_art=(vscode code codium)
+    TERMINAL_NO_ART="${TERMINAL_NO_ART:-${terminal_no_art[@]}}"
+    CURRENT_TERMINAL="${TERM_PROGRAM:-$(ps -o comm= -p $(ps -o ppid= -p $$))}"
+
+    case "${type}" in
+    image)
+        if [[ " ${TERMINAL_IMAGE_SUPPORT[@]} " =~ " ${CURRENT_TERMINAL} " ]]; then
+            return 0
+        else
+            return 1
+        fi
+        ;;
+    art)
+        if [[ " ${TERMINAL_NO_ART[@]} " =~ " ${CURRENT_TERMINAL} " ]]; then
+            return 1
+        else
+            return 0
+        fi
+        ;;
+    *)
+        return 1
+        ;;
+    esac
+}
+
+function _load_compinit() {
+    # Initialize completions with optimized performance
+    autoload -Uz compinit
+
+    # Enable extended glob for the qualifier to work
+    setopt EXTENDED_GLOB
+
+    # Fastest - use glob qualifiers on directory pattern
+    if [[ -n ${ZDOTDIR}/.zcompdump(#qN.mh+${HYDE_ZSH_COMPINIT_CHECK:-1}) ]]; then
+        compinit
+    else
+        compinit -C
+    fi
+
+    _comp_options+=(globdots) # tab complete hidden files
+}
+
+function _load_prompt() {
+    # Try to load prompts immediately
+    if ! source ${ZDOTDIR}/prompt.zsh >/dev/null 2>&1; then
+        [[ -f $ZDOTDIR/conf.d/hyde/prompt.zsh ]] && source $ZDOTDIR/conf.d/hyde/prompt.zsh
+    fi
+}
+
+# Override this environment variable in ~/.zshrc
+# cleaning up home folder
+# ZSH Plugin Configuration
+
+HYDE_ZSH_DEFER="1"      #Unset this variable in $ZDOTDIR/user.zsh to disable HyDE's deferred Zsh loading.
+HYDE_ZSH_PROMPT="1"     #Unset this variable in $ZDOTDIR/user.zsh to disable HyDE's prompt customization.
+HYDE_ZSH_NO_PLUGINS="0" #Set this variable to "1" in $ZDOTDIR/user.zsh to disable HyDE's Zsh plugin loading.
+
+ZSH_AUTOSUGGEST_STRATEGY=(history completion)
+
+# # History configuration
+HISTFILE=${HISTFILE:-$ZDOTDIR/.zsh_history}
+if [[ -f $HOME/.zsh_history ]] && [[ ! -f $HISTFILE ]]; then
+    echo "Please manually move $HOME/.zsh_history to $HISTFILE"
+    echo "Or move it somewhere else to avoid conflicts"
+fi
+HISTSIZE=10000
+SAVEHIST=10000
+
+
+export HISTFILE ZSH_AUTOSUGGEST_STRATEGY HISTSIZE SAVEHIST
+
+# HyDE Package Manager
+PM_COMMAND=(hyde-shell pm)
+
+# Optionally load user configuration // useful for customizing the shell without modifying the main file
+if [[ -f $HOME/.hyde.zshrc ]]; then
+    source $HOME/.hyde.zshrc # for backward compatibility
+elif [[ -f $HOME/.user.zsh ]]; then
+    source $HOME/.user.zsh # renamed to .user.zsh for intuitiveness that it is a user config
+elif [[ -f $ZDOTDIR/user.zsh ]]; then
+    source $ZDOTDIR/user.zsh
+fi
+
+_load_compinit
+
+if [[ ${HYDE_ZSH_NO_PLUGINS} != "1" ]]; then
+    _dedup_zsh_plugins
+    if [[ "$HYDE_ZSH_OMZ_DEFER" == "1" ]] && [[ -r $ZSH/oh-my-zsh.sh ]]; then
+        # Loads the buggy deferred oh-my-zsh plugin system by HyDE // This is only for oh-my-zsh and compatibility
+        _load_deferred_plugin_system_by_hyde
+        _load_prompt # This disables transient prompts sadly
+    elif source $ZDOTDIR/plugin.zsh >/dev/null 2>&1; then
+        # Load plugins from the user's plugin.zsh file
+        # This is useful for users who want to use their own plugin system
+        source $ZDOTDIR/plugin.zsh
+        _load_prompt
+        _load_functions
+        _load_completions
+    elif [[ -r $ZSH/oh-my-zsh.sh ]]; then
+        # Load oh-my-zsh if it exists in the ZSH directory
+        #  Default if the $ZDOTDIR/plugin.zsh file does not exist or returns an error
+        source $ZSH/oh-my-zsh.sh
+        _load_prompt
+        _load_functions
+        _load_completions
+    else
+        echo "No plugin system found. Please install a plugin system or create a $ZDOTDIR/plugin.zsh file."
+        echo "You can use $ZDOTDIR/plugin.zsh file to load your own plugins."
+    fi
+else
+    # Load user plugins if they exist
+    # Assumes user has a plugin.zsh file in their $ZDOTDIR
+    [[ -r $ZDOTDIR/plugin.zsh ]] && source $ZDOTDIR/plugin.zsh
+    _load_prompt
+    _load_functions
+    _load_completions
+fi
+
+__package_manager () { 
+    ${PM_COMMAND[@]} "$@"
+}
+
+alias c='clear' \
+    in='__package_manager install' \
+    un='__package_manager remove' \
+    up='__package_manager upgrade' \
+    pl='__package_manager search installed' \
+    pa='__package_manager search all' \
+    vc='code' \
+    fastfetch='fastfetch --logo-type kitty' \
+    ..='cd ..' \
+    ...='cd ../..' \
+    .3='cd ../../..' \
+    .4='cd ../../../..' \
+    .5='cd ../../../../..' \
+    mkdir='mkdir -p'
+
+
--- a/.config/zsh/functions/bat.zsh
+++ b/.config/zsh/functions/bat.zsh
@@ -0,0 +1,5 @@
+if command -v "bat" &>/dev/null; then
+    #! alias -g -- h='-h 2>&1 | bat --language=help --style=plain --paging=never --color always' # <--- this is discouraged! This conflicts with posix -h test operator
+    alias -g -- --help='--help 2>&1 | bat --language=help --style=plain --paging=never --color always'
+    alias cat='bat --style=plain --paging=never --color auto'
+fi
--- a/.config/zsh/functions/error-handlers.zsh
+++ b/.config/zsh/functions/error-handlers.zsh
@@ -0,0 +1,77 @@
+function command_not_found_handler {
+    local purple='\e[1;35m' bright='\e[0;1m' green='\e[1;32m' reset='\e[0m'
+    printf "${green}zsh${reset}: command ${purple}NOT${reset} found: ${bright}'%s'${reset}\n" "$1"
+
+    if ! ${PM_COMMAND[@]} -h &>/dev/null; then
+        return 127
+    fi
+
+    printf "${bright}Searching for packages that provide '${bright}%s${green}'...\n${reset}" "${1}"
+
+    if ! "${PM_COMMAND[@]}" fq "/usr/bin/$1"; then
+        printf "${bright}${green}[ ${1} ]${reset} ${purple}NOT${reset} found in the system and no package provides it.\n"
+        return 127
+    else
+        printf "${green}[ ${1} ] ${reset} might be provided by the above packages.\n"
+        for entry in $entries; do
+            # Assuming the entry already has ANSI color codes, we don't add more colors
+            printf "  %s\n" "${entry}"
+        done
+
+    fi
+    return 127
+}
+
+# Function to display a slow load warning
+# the intention is for hyprdots users who might have multiple zsh initialization
+function _slow_load_warning {
+    local lock_file="/tmp/.hyde_slow_load_warning.lock"
+    local load_time=$SECONDS
+
+    # Check if the lock file exists
+    if [[ ! -f $lock_file ]]; then
+        # Create the lock file
+        touch $lock_file
+
+        # Display the warning if load time exceeds the limit
+        time_limit=3
+        if ((load_time > time_limit)); then
+            cat <<EOF
+    ⚠️ Warning: Shell startup took more than ${time_limit} seconds. Consider optimizing your configuration.
+        1. This might be due to slow plugins, slow initialization scripts.
+        2. Duplicate plugins initialization.
+            - navigate to ~/.zshrc and remove any 'source ZSH/oh-my-zsh.sh' or
+                'source ~/.oh-my-zsh/oh-my-zsh.sh' lines.
+            - HyDE already sources the oh-my-zsh.sh file for you.
+            - It is important to remove all HyDE related
+                configurations from your .zshrc file as HyDE will handle it for you.
+            - Check the '.zshrc' file from the repo for a clean configuration.
+                https://github.com/HyDE-Project/HyDE/blob/master/Configs/.zshrc
+        3. Check the '~/.user.zsh' file for any slow initialization scripts.
+
+    For more information, on the possible causes of slow shell startup, see:
+        🌐 https://github.com/HyDE-Project/HyDE/wiki
+
+EOF
+        fi
+    fi
+}
+
+# Function to handle initialization errors
+function handle_init_error {
+    if [[ $? -ne 0 ]]; then
+        echo "Error during initialization. Please check your configuration."
+    fi
+}
+
+
+function no_such_file_or_directory_handler {
+    local red='\e[1;31m' reset='\e[0m'
+    printf "${red}zsh: no such file or directory: %s${reset}\n" "$1"
+    return 127
+}
+
+# ------------------------------------------------------------
+
+# # Warn if the shell is slow to load
+# add-zsh-hook -Uz precmd _slow_load_warning #! try to not use for now as we already move zshrc
--- a/.config/zsh/functions/eza.zsh
+++ b/.config/zsh/functions/eza.zsh
@@ -0,0 +1,6 @@
+if command -v "eza" &>/dev/null; then
+    alias l='eza -lh --icons=auto' \
+        ll='eza -lha --icons=auto --sort=name --group-directories-first' \
+        ld='eza -lhD --icons=auto' \
+        lt='eza --icons=auto --tree'
+fi
--- a/.config/zsh/functions/fzf.zsh
+++ b/.config/zsh/functions/fzf.zsh
@@ -0,0 +1,119 @@
+# best fzf aliases ever
+_fuzzy_change_directory() {
+    local initial_query="$1"
+    local selected_dir
+    local fzf_options=('--preview=ls -p {}' '--preview-window=right:60%')
+    fzf_options+=(--height "80%" --layout=reverse --preview-window right:60% --cycle)
+    local max_depth=7
+
+    if [[ -n "$initial_query" ]]; then
+        fzf_options+=("--query=$initial_query")
+    fi
+
+    #type -d
+    selected_dir=$(find . -maxdepth $max_depth \( -name .git -o -name node_modules -o -name .venv -o -name target -o -name .cache \) -prune -o -type d -print 2>/dev/null | fzf "${fzf_options[@]}")
+
+    if [[ -n "$selected_dir" && -d "$selected_dir" ]]; then
+        cd "$selected_dir" || return 1
+    else
+        return 1
+    fi
+}
+
+_fuzzy_edit_search_file_content() {
+    # [f]uzzy [e]dit  [s]earch [f]ile [c]ontent
+    local selected_file
+    local fzf_options=()
+    local preview_cmd
+    if command -v "bat" &>/dev/null; then
+        preview_cmd=('bat --color always --style=plain --paging=never {}')
+    else
+        preview_cmd=('cat {}')
+    fi
+    fzf_options+=(--height "80%" --layout=reverse --cycle --preview-window right:60% --preview ${preview_cmd[@]})
+    selected_file=$(grep -irl "${1:-}" ./ | fzf "${fzf_options[@]}")
+
+    if [[ -n "$selected_file" ]]; then
+        if command -v "$EDITOR" &>/dev/null; then
+            "$EDITOR" "$selected_file"
+        else
+            echo "EDITOR is not specified. using vim.  (you can export EDITOR in ~/.zshrc)"
+            vim "$selected_file"
+        fi
+
+    else
+        echo "No file selected or search returned no results."
+    fi
+}
+
+_fuzzy_edit_search_file() {
+    local initial_query="$1"
+    local selected_file
+    local fzf_options=()
+    fzf_options+=(--height "80%" --layout=reverse --preview-window right:60% --cycle)
+    local max_depth=5
+
+    if [[ -n "$initial_query" ]]; then
+        fzf_options+=("--query=$initial_query")
+    fi
+
+    # -type f: only find files
+    selected_file=$(find . -maxdepth $max_depth -type f 2>/dev/null | fzf "${fzf_options[@]}")
+
+    if [[ -n "$selected_file" && -f "$selected_file" ]]; then
+        if command -v "$EDITOR" &>/dev/null; then
+            "$EDITOR" "$selected_file"
+        else
+            echo "EDITOR is not specified. using vim.  (you can export EDITOR in ~/.zshrc)"
+            vim "$selected_file"
+        fi
+    else
+        return 1
+    fi
+}
+
+_fuzzy_search_cmd_history() {
+  local selected
+  setopt localoptions noglobsubst noposixbuiltins pipefail no_aliases noglob nobash_rematch 2> /dev/null
+
+  local fzf_query=""
+  if [[ -n "$1" ]]; then
+    fzf_query="--query=${(qqq)1}"
+  else
+    fzf_query="--query=${(qqq)LBUFFER}"
+  fi
+
+  if zmodload -F zsh/parameter p:{commands,history} 2>/dev/null && (( ${+commands[perl]} )); then
+    selected="$(printf '%s\t%s\000' "${(kv)history[@]}" |
+      perl -0 -ne 'if (!$seen{(/^\s*[0-9]+\**\t(.*)/s, $1)}++) { s/\n/\n\t/g; print; }' |
+      FZF_DEFAULT_OPTS=$(__fzf_defaults "" "-n2..,.. --scheme=history --bind=ctrl-r:toggle-sort --wrap-sign '\t↳ ' --highlight-line ${FZF_CTRL_R_OPTS-} $fzf_query +m --read0") \
+      FZF_DEFAULT_OPTS_FILE='' $(__fzfcmd))"
+  else
+    selected="$(fc -rl 1 | __fzf_exec_awk '{ cmd=$0; sub(/^[ \t]*[0-9]+\**[ \t]+/, "", cmd); if (!seen[cmd]++) print $0 }' |
+      FZF_DEFAULT_OPTS=$(__fzf_defaults "" "-n2..,.. --scheme=history --bind=ctrl-r:toggle-sort --wrap-sign '\t↳ ' --highlight-line ${FZF_CTRL_R_OPTS-} $fzf_query +m") \
+      FZF_DEFAULT_OPTS_FILE='' $(__fzfcmd))"
+  fi
+  local ret=$?
+  if [ -n "$selected" ]; then
+    if [[ $(__fzf_exec_awk '{print $1; exit}' <<< "$selected") =~ ^[1-9][0-9]* ]]; then
+      zle vi-fetch-history -n $MATCH
+    else
+      LBUFFER="$selected"
+    fi
+  fi
+  return $ret
+}
+
+
+
+alias ffec='_fuzzy_edit_search_file_content' \
+    ffcd='_fuzzy_change_directory' \
+    ffe='_fuzzy_edit_search_file' \
+    ffch='_fuzzy_search_cmd_history'
+
+
+
+
+
+
+
--- a/.config/zsh/user.zsh
+++ b/.config/zsh/user.zsh
@@ -0,0 +1,35 @@
+#  Startup 
+# Commands to execute on startup (before the prompt is shown)
+# Check if the interactive shell option is set
+if [[ $- == *i* ]]; then
+    # This is a good place to load graphic/ascii art, display system information, etc.
+    if command -v pokego >/dev/null; then
+        pokego --no-title -r 1,3,6
+    elif command -v pokemon-colorscripts >/dev/null; then
+        pokemon-colorscripts --no-title -r 1,3,6
+    elif command -v fastfetch >/dev/null; then
+        if do_render "image"; then
+            fastfetch --logo-type kitty
+        fi
+    fi
+fi
+
+#  Plugins 
+# manually add your oh-my-zsh plugins here
+plugins=(
+    "sudo"
+)
+
+#   Overrides 
+# unset HYDE_ZSH_NO_PLUGINS # Set to 1 to disable loading of oh-my-zsh plugins, useful if you want to use your zsh plugins system 
+# unset HYDE_ZSH_PROMPT # Uncomment to unset/disable loading of prompts from HyDE and let you load your own prompts
+# HYDE_ZSH_COMPINIT_CHECK=1 # Set 24 (hours) per compinit security check // lessens startup time
+# HYDE_ZSH_OMZ_DEFER=1 # Set to 1 to defer loading of oh-my-zsh plugins ONLY if prompt is already loaded
+
+# Aliases
+# alias  l='eza -1h  --icons=auto --sort=name --group-directories-first' # long list
+# alias ls='eza -l   --icons=auto --sort=name --group-directories-first' # short list
+# alias ll='eza -lha --icons=auto --sort=name --group-directories-first' # long list all
+# alias дд='eza -lha --icons=auto --sort=name --group-directories-first' # sometimes i forget to change keyboard layout
+# alias startwayvnc='wayvnc 100.108.196.99 > /dev/null 2>&1 & | disown'
+# alias killwayvnc='killall wayvnc'
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1,3 @@
+.config/nvim/lua/chadrc.lua
+.zcomp*
+.zsh_history*
--- a/.tmux.conf
+++ b/.tmux.conf
@@ -1,9 +1,17 @@
 set -g base-index 1
 setw -g pane-base-index 1
-set -g allow-passthrough on
+set-option -g allow-passthrough on
+
+# List of plugins
+set -g @plugin 'tmux-plugins/tpm'
+set -g @plugin 'tmux-plugins/tmux-sensible'
+set -g @plugin 'tmux-plugins/tmux-resurrect'

 set-window-option -g mode-keys vi
 bind-key -T copy-mode-vi v send -X begin-selection
 bind-key -T copy-mode-vi V send -X select-line
 set -s copy-command 'xclip -in -selection clipboard'
 bind-key -T copy-mode-vi y send -X copy-pipe-and-cancel 'xclip -in -selection clipboard'
+set -g @resurrect-strategy-nvim 'session'
+
+run '~/.tmux/plugins/tpm/tpm'
--- a/.tmux/plugins/tmux-resurrect
+++ b/.tmux/plugins/tmux-resurrect
--- a/.tmux/plugins/tmux-sensible
+++ b/.tmux/plugins/tmux-sensible
--- a/.tmux/plugins/tpm
+++ b/.tmux/plugins/tpm
--- a/.zshenv
+++ b/.zshenv
@@ -0,0 +1,9 @@
+#!/usr/bin/env zsh
+
+XDG_CONFIG_HOME="${XDG_CONFIG_HOME:-$HOME/.config}"
+export ZDOTDIR="${ZDOTDIR:-$XDG_CONFIG_HOME/zsh}"
+
+if ! source $ZDOTDIR/.zshenv; then
+    echo "FATAL Error: Could not source $ZDOTDIR/.zshenv"
+    return 1
+fi
--- a/.zshrc
+++ b/.zshrc
@@ -1,148 +0,0 @@
-# Enable Powerlevel10k instant prompt
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
-# Path to your oh-my-zsh installation.
-ZSH=/usr/share/oh-my-zsh/
-
-# Path to powerlevel10k theme
-source /usr/share/zsh-theme-powerlevel10k/powerlevel10k.zsh-theme
-
-# List of plugins used
-plugins=( git sudo zsh-256color zsh-autosuggestions zsh-syntax-highlighting )
-source $ZSH/oh-my-zsh.sh
-
-# In case a command is not found, try to find the package that has it
-function command_not_found_handler {
-    local purple='\e[1;35m' bright='\e[0;1m' green='\e[1;32m' reset='\e[0m'
-    printf 'zsh: command not found: %s\n' "$1"
-    local entries=( ${(f)"$(/usr/bin/pacman -F --machinereadable -- "/usr/bin/$1")"} )
-    if (( ${#entries[@]} )) ; then
-        printf "${bright}$1${reset} may be found in the following packages:\n"
-        local pkg
-        for entry in "${entries[@]}" ; do
-            local fields=( ${(0)entry} )
-            if [[ "$pkg" != "${fields[2]}" ]] ; then
-                printf "${purple}%s/${bright}%s ${green}%s${reset}\n" "${fields[1]}" "${fields[2]}" "${fields[3]}"
-            fi
-            printf '    /%s\n' "${fields[4]}"
-            pkg="${fields[2]}"
-        done
-    fi
-    return 127
-}
-
-# Detect the AUR wrapper
-if pacman -Qi yay &>/dev/null ; then
-   aurhelper="yay"
-elif pacman -Qi paru &>/dev/null ; then
-   aurhelper="paru"
-fi
-
-# Cache AUR helper detection
-if [[ -z "$aurhelper" ]]; then
-    if command -v yay >/dev/null 2>&1; then
-        export aurhelper="yay"
-    elif command -v paru >/dev/null 2>&1; then
-        export aurhelper="paru"
-    fi
-fi
-
-function in {
-    local -a inPkg=("$@")
-    local -a arch=()
-    local -a aur=()
-
-    for pkg in "${inPkg[@]}"; do
-        if pacman -Si "${pkg}" &>/dev/null ; then
-            arch+=("${pkg}")
-        else 
-            aur+=("${pkg}")
-        fi
-    done
-
-    if [[ ${#arch[@]} -gt 0 ]]; then
-        sudo pacman -S "${arch[@]}"
-    fi
-
-    if [[ ${#aur[@]} -gt 0 ]]; then
-        ${aurhelper} -S "${aur[@]}"
-    fi
-}
-
-# Helpful aliases
-alias  c='clear' # clear terminal
-alias  l='eza -1h  --icons=auto --sort=name --group-directories-first' # long list
-alias ls='eza -l   --icons=auto --sort=name --group-directories-first' # short list
-alias ll='eza -lha --icons=auto --sort=name --group-directories-first' # long list all
-alias дд='eza -lha --icons=auto --sort=name --group-directories-first' # sometimes i forget to change keyboard layout
-alias lt='eza --icons=auto --tree' # list folder as tree
-alias un='$aurhelper -Rns' # uninstall package
-alias up='$aurhelper -Syu' # update system/package/aur
-alias pl='$aurhelper -Qs' # list installed package
-alias pa='$aurhelper -Ss' # list available package
-alias pc='$aurhelper -Sc' # remove unused cache
-alias po='$aurhelper -Qtdq | $aurhelper -Rns -' # remove unused packages, also try > $aurhelper -Qqd | $aurhelper -Rsu --print -
-alias icat='kitten icat' # display images in terminal
-alias ssh='kitten ssh' # functional ssh with kitty
-alias snv='sudo -E nvim' # sudo nvim
-alias nv='nvim'
-alias ff='fastfetch'
-alias pi='ssh omoelle'
-alias pi-mount='sshfs omoelle:/home/elleoma ~/mnt && cd ~/mnt'
-alias cat='bat --paging=never'
-alias wifi="nmcli d wifi show-password | grep 'Password' | awk -F': ' '{ print \$2 }'"
-alias pivpn="wg-quick up laptop"
-alias config='git --git-dir=/home/elleoma/.config --work-tree=/home/elleoma'
-
-# git aliases
-alias gs='git status '
-alias ga='git add '
-alias gb='git branch '
-alias gc='git commit'
-alias gd='git diff'
-alias gco='git checkout '
-alias gk='gitk --all&'
-alias gx='gitx --all'
-alias got='git '
-alias get='git '
-alias gut='git '
-
-
-# Handy change dir shortcuts
-alias ..='cd ..'
-alias ...='cd ../..'
-alias .3='cd ../../..'
-alias .4='cd ../../../..'
-alias .5='cd ../../../../..'
-
-# Alias for cross-compile to windows
-#alias x86_64-w64-mingw32-g++='mingw'
-
-# Always mkdir a path (this doesn't inhibit functionality to make a single dir)
-alias mkdir='mkdir -p'
-
-# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
-
-# Syntax highlighting for man pages
-export MANPAGER='nvim +Man!'
-
-# Setting Ruby path
-export GEM_HOME="$(ruby -e 'puts Gem.user_dir')"
-export PATH="$PATH:$GEM_HOME/bin"
-
-# Created by `pipx` on 2025-02-01 15:08:39
-export PATH="$PATH:/home/elleoma/.local/bin"
-
-# Setting up Rust
-export PATH="$HOME/.cargo/bin:$PATH"
-
-#THIS MUST BE AT THE END OF THE FILE FOR SDKMAN TO WORK!!!
-export SDKMAN_DIR="$HOME/.sdkman"
-[[ -s "$HOME/.sdkman/bin/sdkman-init.sh" ]] && source "$HOME/.sdkman/bin/sdkman-init.sh"
-export PATH=~/.npm-global/bin:$PATH
-
-# go binaries path
-export PATH=~/go/bin:$PATH
Author	SHA1	Message	Date
Amoelle	8219da676d	windowrules	2025-08-05 15:19:06 +03:00
Amoelle	af6b4654e4	update	2025-08-04 20:24:49 +03:00
Amoelle	56ae38478f	changed autotab to 4 spaces in neovim	2025-07-29 11:07:11 +03:00
Amoelle	3687134540	fastfetch logo	2025-07-23 12:11:26 +03:00
Amoelle	677a668445	update tmux config	2025-07-19 11:10:42 +03:00
elleoma	b39f6642c9	Update .gitignore	2025-07-17 10:23:29 +03:00
Amoelle	83201ab5db	small updates & switched to zen browser	2025-07-17 10:19:18 +03:00
Amoelle	5bf08de339	add .zshenv	2025-07-14 17:38:44 +03:00
Amoelle	aeb3f14a90	update hyprlock & change to default file manager to dolphin	2025-07-09 21:16:09 +03:00
Amoelle	d6a70ecd95	update HyDE	2025-07-09 15:43:49 +03:00
Amoelle	9ba08481e3	Merge remote-tracking branch 'refs/remotes/origin/main'	2025-07-08 10:59:39 +03:00
Amoelle	a457632f97	gitignore	2025-07-08 10:49:01 +03:00
Amoelle	0d143deb38	add alias for pacman cache cleaning	2025-07-08 10:47:28 +03:00